STEEL STORE

Angles

MAH12

EAVE STRUT ANGLE 2:12, HIGH SIDE, 1" x 2.5" x 12"

Part: MAH12

NOTE: Used as misc angle to span secondary members and provide panel attachment. Available in Galvanized only.

More Details
MAH13

EAVE STRUT ANGLE 3:12, HIGH SIDE, 1" x 2.5" x 12"

Part: MAH13

NOTE: Used as misc angle to span secondary members and provide panel attachment. Available in Galvanized only.

More Details
MAH14

EAVE STRUT ANGLE 4:12, HIGH SIDE, 1" x 2.5" x 12"

Part: MAH14

NOTE: Used as misc angle to span secondary members and provide panel attachment. Available in Galvanized only.

More Details
MAL01

LINER EAVE ANGLE 6" x 7.75" x 10'-0"

Part: MAL01

NOTE: Used for liner attachment. Available in Galvanized only.

More Details
MAL02

LINER EAVE ANGLE 2:12 - 3" x 3" x 10'-0"

Part: MAL02

NOTE: Used for liner attachment at low eave with 8", 9 1/2" or 10" girts. Available in Galvanized only.

More Details
MAL03

LINER EAVE ANGLE 3:12 - 3" x 3" x 10'-0"

Part: MAL03

NOTE: Used for liner attachment at low eave with 8" girts. Available in Galvanized only.

More Details
MAL04

LINER EAVE ANGLE 3:12 - 3" x 3" x 10'-0"

Part: MAL04

NOTE: Used for liner attachment at low eave with 9 1/2" or 10" girts. Available in Galvanized only.

More Details
MAL05

LINER EAVE ANGLE 4:12 - 3" x 3" x 10'-0"

Part: MAL05

NOTE: Used for liner attachment at low eave with 8" girts. Available in Galvanized only.

More Details
MAL06

LINER EAVE ANGLE 4:12 - 3" x 3" x 10'-0"

Part: MAL06

NOTE: Used for liner attachment at low eave with 9 1/2" or 10" girts. Available in Galvanized only.

More Details
MAL07

LINER EAVE ANGLE 1:12 - 3" x 3" x 10'-0"

Part: MAL07

NOTE: Used for liner attachment at low eave with 8", 9 1/2" or 10" girts. Available in Galvanized only.

More Details
MAP01

RAKE PARAPET ANGLE 2" x 12" x 10'-0"

Part: MAP01

NOTE: Used at high/low building transitions for sheeting attachment. Available in Galvanized only.

More Details
MAP02

RAKE PARAPET ANGLE 6" x 6" x 10'-0"

Part: MAP02

NOTE: Used at high/low building transitions for sheeting attachment. Available in Galvanized only.

More Details
MAP03

RAKE PARAPET ANGLE 6" x 12" x 10'-0"

Part: MAP03

NOTE: Used at high/low building transitions for sheeting attachment. Available in Galvanized only.

More Details
MAR01

RAKE ANGLE 3" x 5" x 20'-2"

Part: MAR01

NOTE: Typically used at the rake for wall panel attachment. Available in Galvanized only.

More Details
MAR02

RAKE ANGLE/BASE ANGLE 2" x 3" x 20'-2"

Part: MAR02

NOTE: Typically used for wall panel attachment at the floor and used with the trapezoidal and vertical rib roof floating rake system. Available in Galva

More Details
1 2 3

Punching Special Type:

Standard Punches = 9/16" x 1" Slot
Keyhole Punches = 3/16" x 2 1/4"
Loading...