STEEL STORE

Angles

EIB24

ELEVATED INSULATION BRIDGE

Part: EIB24

NOTE: Used for raising SS360 and CFR roof panels to allow an additional layer of insulation above the secondary in colder climates.

More Details
EZH1120

LOW EAVE ZEE TALL CLIP 1:12

Part: EZH1120

NOTE: Used at low side eave conditions for R-Boost projects with tall clips. Related parts: H1025 or H1075 fasteners. Available in Galvanized only.

More Details
EZH2120

LOW EAVE ZEE TALL CLIP 2:12

Part: EZH2120

NOTE: Used at low side eave conditions for R-Boost projects with tall clips. Related parts: H1025 or H1075 fasteners. Available in Galvanized only.

More Details
EZS1120

LOW EAVE ZEE SUPER TALL CLIP 1:12

Part: EZS1120

NOTE: Used at low side eave conditions for R-Boost projects with super tall clips. Related parts: H1025 or H1075 fasteners. Available in Galvanized only.

More Details
EZS2120

LOW EAVE ZEE SUPER TALL CLIP 2:12

Part: EZS2120

NOTE: Used at low side eave conditions for R-Boost projects with super tall clips. Related parts: H1025 or H1075 fasteners. Available in Galvanized only.

More Details
FEB120

FLASHING ENDLAP BACKER

Part: FEB120

NOTE: Used at trim laps to provide reinforced attachment.

More Details
HEM1120

HIGH EAVE MEMBER, 2" x 12" x 10'-0" Angle 1:12 Pitch

Part: HEM1120

NOTE: Used at high side eave conditions for R-Boost projects. Related parts: H1020 fasteners. Available in Galvanized only.

More Details
HEM2120

HIGH EAVE MEMBER, 2" x 12" x 10'-0" Angle 2:12 Pitch

Part: HEM2120

NOTE: Used at high side eave conditions for R-Boost projects. Related parts: H1020 fasteners. Available in Galvanized only.

More Details
IRC120

INSULATION RETAINER CEE

Part: IRC120

NOTE: Used at rake conditions for R-Boost projects. Related parts: H1070 fasteners. Available in Galvanized only.

More Details
MAE01

EAVE ANGLE 1:12 - 4" x 5" x 10'-0"

Part: MAE01

NOTE: Typically used with a low eave reverse purlin. Available in Galvanized only.

More Details
MAE02

EAVE ANGLE 2:12 - 4" x 5" x 10'-0"

Part: MAE02

NOTE: Typically used with a low eave reverse purlin. Available in Galvanized only.

More Details
MAE03

EAVE ANGLE 3:12 - 4" x 5" x 10'-0"

Part: MAE03

NOTE: Typically used with a low eave reverse purlin. Available in Galvanized only.

More Details
MAE04

EAVE ANGLE 4:12 - 4" x 5" x 10'-0"

Part: MAE04

NOTE: Typically used with a low eave reverse purlin. Available in Galvanized only.

More Details
MAE05

EAVE ANGLE 5:12 - 4" x 5" x 10'-0"

Part: MAE05

NOTE: Typically used with a low eave reverse purlin. Available in Galvanized only.

More Details
MAE06

EAVE ANGLE 6:12 - 4" x 5" x 10'-0"

Part: MAE06

NOTE: Typically used with a low eave reverse purlin. Available in Galvanized only.

More Details
1 2 3

Punching Special Type:

Standard Punches = 9/16" x 1" Slot
Keyhole Punches = 3/16" x 2 1/4"
Loading...